2 seats

Konceptet med BellaBike-cyklen er én cykel til det hele.

En modulerbar kasse med plads til mor eller far, 2 børn og et par store indkøbsposer. Start med ingen sæder og udbyg efter behov som familien vokser, med op til 4 siddepladser. For at opnå den største komfort og sikkerhed er alle sæder med 3-punkt-seler.

De special-designede nedfældelige kalecher sørger for tørvejr på regnfulde dage.

Rear bench seat

This is the classic layout for most transporter bikes. It gives loads of space for shopping – or sleeping – on longer trips. The backrest reclines slightly to ensure seating comfort, and the bench seat is fitted with two 3-point seat belts.

A foam mattress is available as an optional feature. The combination shown, that also can include the large wire frame hood, is only available with Bella 4 model bikes.

Centre bench

With the bench located in the center, the transporter box is effectively divided into two compartments, giving flexibility with where to place shopping, clothes, boots etc.

With this combination the bench height can be adjusted 5 cm up or down, to fit your needs, and the back rest can be fitted either upright – or with a slight recline.

The bench seat is fitted with two 3-point seat belts as a standard feature.

This combination can be used with all hood types that are available with Bella 4 bikes.

Reclined centre bench

In the combination shown, the bench seat is positioned so that both the seat and the backrest recline slightly. This helps when seating smaller children or toddlers, as they are automatically held back in the seat by the reclining angle.

The bench seat is of course fitted with two 3-point seat belts as a standard feature. This model can be used with all hood types available with Bella 4 bikes.

If the smaller wire frame hood is used, then the hood should be angled back when transporting larger children, as the reclining angle means that the children’s faces are positioned further to the rear of the box, where the height of the hood is lower.

Twin seaters – in a row

In this combination, there’s room for 2 children and a carrycot. Both seats are fitted with 3-point seat belts.

This combination is generally only used until child number three is big enough for his or her own seat. When this happens, the seats can be re-arranged and a new one added – for example a bench seat, a third standard single seat – or even an alloy seat.

Special straps that can hold a baby lift fast are available as an optional feature.

The combination shown, that also can include the large wire frame hood, is only available with Bella 4 model bikes.

Twin seaters – with alloy chairs

As an alternative to the normal wooden seats, you can choose to kit out your Bella bike with one or two alloy chairs. The alloy seat is particularly suited for transporting toddlers and smaller children, as the backrest can be adjusted from an upright to a fully reclined position.

It can be used in much the same way as a child’s booster seat can in a car. A head neck pillow is available as an added option.

The alloy seat can be mounted on a Bella 2 or Bella 4 bike, and the seat can be used with all hood types provided by Bellabike.

You can even mount it on other transporter bikes, provided they have a flat base.

Colour: Black.

Aluminum Chair

The alloy seat is made of aluminum tubing, over which the seat and backrest are stretched and fitted.

The alloy seat is especially suited for transporting toddlers and smaller children. They can be adjusted from upright to fully reclined, and can be mounted so they face either forwards or backwards, and you can tip the back fully forward, when loading shopping behind the seats.

You can also adjust the position of the seat inside the box, as it can be moved forwards or backwards by sliding the seat along a glider at the base that can be locked with a quick release bolt when it’s in the right position.

A 3 point hip safety belt, with a strap between the legs, and an extra strap around the cheast for smaller children, increases safety and ensures you child can’t climb out while you’re riding, and a head neck pillow is available as an added option.

The alloy seat can be mounted on a Bella 2 or Bella 4 bike, and the seat can be used with all hood types provided by Bellabike. You can even mount it on other transporter bikes, provided they have a flat base.

Colour: Black.

Wooden bench in front position

In the setup shown the bench in front, position gives enough room behind for a standard baby car seat. The bench is fitted with 3-point seat belts. Straps to fasten the baby car seat down are available as an optional feature.

The combination shown is often used as a temporary setup, after which the bike gets fitted out with another seat.

The combination shown can be used with all hood types available with Bella 4.